Subject: Antifreeze myths?
From: Rotary Engine
Date: 11/20/2006, 11:28 AM
To: AA-me




Paul,
Some interesting tidbits about antifreeze.
I don't know the author ...

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Colour no longer reliably indicate coolant corrosion inhibitor chemistry.

Old conventional (usually green) silicate-inhibitor coolant is almost
extinct.

Death-Cool (Dex-Cool) uses "OAT", Organic Acid Technology corrosion
inhibitors. It was GM's dumb idea in the 1990s, to replace silicate
corrosion inhibitors. Even in GM's specially-made cooling systems, this
stuff is widely blamed for many, many expensive failures (head gaskets,
intake gaskets, cooling systems, etc.  And that's in systems specifically
designed for it. There are consumer actions and class-action lawsuits and
everything. Using it in systems not designed for it = disaster, just ask
my wallet

The "Universal" coolants now filling store shelves are almost all G-05,
which is HOAT, Hybrid Organic Acid Technology. Despite the worrisome
similarity of the terminology to the Dex-Cool inhibitors, this stuff seems
to give terrific performance and excellent compatibility with a very wide
variety of systems.

But, colour cannot tell you the inhibitor technology. There are G-05
coolants that are dyed the same red-orange colour as Death-Cool (a/k/a
Dex-Cool). There's also yellow G-05, blue G-05, and possibly pink G-05.
It's important to know what you've got in your system and what you're
adding. Most times you won't cause solidification or gelling, but when you
start mixing randomly, the results will be...random!

Dex-Cool or "Compatible With Dex-Cool" entices with claims of super ultra
long life. Fuhgeddaboudit. It rapidly and aggressively eats solder joints
and attacks many gasket/seal materials even in the GM engines for which it
was (poorly) designed. I lost a great deal of time, money and effort
fixing damage caused by my foolish decision to use Dex-Cool in my own
cars. Eventually I wisened up and did some bench tests...it only took
watching Dex-Cool dissolve three or four different gasket materials before
my eyes to make me swear off this junk forever, in any vehicle.
(Meanwhile, the intake manifold gasket coolant leaks for which GM's
2.8-3.1-3.4 litre V6s were already notorious, worsened considerably with
GM's adoption of Dex-Cool.)

G-05: Probably best for most of our cars.

Really good 2-part article from June and July 2002 Car & Driver magazine
on coolants, see
http://www.caranddriver.com/article.asp?section_id=27&article_id=2334&page_number=1
<http://www.caranddriver.com/article.asp?section_id=27&article_id=2334&page_number=1>
and
http://www.caranddriver.com/columns/2264/patrick-bedard.html


Bruce Toski


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.