Subject: Antifreeze myths?
From: Rotary Engine
Date: 11/20/2006, 2:11 PM
To: AA-me


   Paul,
   Some interesting tidbits about antifreeze.
   I don't know the author ...

   +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

   Colour no longer reliably indicate coolant corrosion inhibitor
   chemistry.

   Old conventional (usually green) silicate-inhibitor coolant is almost
   extinct.

   Death-Cool (Dex-Cool) uses "OAT", Organic Acid Technology corrosion
   inhibitors. It was GM's dumb idea in the 1990s, to replace silicate
   corrosion inhibitors. Even in GM's specially-made cooling systems, this
   stuff is widely blamed for many, many expensive failures (head gaskets,
   intake gaskets, cooling systems, etc.  And that's in systems
   specifically
   designed for it. There are consumer actions and class-action
   lawsuits and
   everything. Using it in systems not designed for it = disaster, just ask
   my wallet

   The "Universal" coolants now filling store shelves are almost all G-05,
   which is HOAT, Hybrid Organic Acid Technology. Despite the worrisome
   similarity of the terminology to the Dex-Cool inhibitors, this stuff
   seems
   to give terrific performance and excellent compatibility with a very
   wide
   variety of systems.

   But, colour cannot tell you the inhibitor technology. There are G-05
   coolants that are dyed the same red-orange colour as Death-Cool (a/k/a
   Dex-Cool). There's also yellow G-05, blue G-05, and possibly pink G-05.
   It's important to know what you've got in your system and what you're
   adding. Most times you won't cause solidification or gelling, but
   when you
   start mixing randomly, the results will be...random!

   Dex-Cool or "Compatible With Dex-Cool" entices with claims of super
   ultra
   long life. Fuhgeddaboudit. It rapidly and aggressively eats solder
   joints
   and attacks many gasket/seal materials even in the GM engines for
   which it
   was (poorly) designed. I lost a great deal of time, money and effort
   fixing damage caused by my foolish decision to use Dex-Cool in my own
   cars. Eventually I wisened up and did some bench tests...it only took
   watching Dex-Cool dissolve three or four different gasket materials
   before
   my eyes to make me swear off this junk forever, in any vehicle.
   (Meanwhile, the intake manifold gasket coolant leaks for which GM's
   2.8-3.1-3.4 litre V6s were already notorious, worsened considerably with
   GM's adoption of Dex-Cool.)

   G-05: Probably best for most of our cars.

   Really good 2-part article from June and July 2002 Car & Driver magazine
   on coolants, see
   http://www.caranddriver.com/article.asp?section_id=27&article_id=2334&page_number=1
   <http://www.caranddriver.com/article.asp?section_id=27&article_id=2334&page_number=1>
   <http://www.caranddriver.com/article.asp?section_id=27&article_id=2334&page_number=1
   <http://www.caranddriver.com/article.asp?section_id=27&article_id=2334&page_number=1>>
   and
   http://www.caranddriver.com/columns/2264/patrick-bedard.html


   Bruce Toski



So, what you're really saying is that Death Cool is really a very high
tech gasket remover..   :)  I wonder if the guys you have wash tanks
have clued into this new technology for degunking engines..


Matt-


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.