Crack the throttle, press the starter button and slowly
open the mixture leaning valve. If engine does not start in
a few seconds or floods, close the mixture leaning valve.

This won't work on a side exhaust port RX8 engine as once
it is flooded that's it. It won't start unless you remove
the raw fuel somehow accumulated in the bottom of the rotor
housing.

RX8 rotor housings can be bored out for peripheral
exhaust ports.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.