Subject: Aspect Ratio (for lack of a better term)
From: Rotary Engine
Date: 11/22/2006, 10:16 PM
To: AA-me



Hey Paul,

My buddy and I were talking about BD5's (not a good idea - Hah!), and
the discussion reminded me of that little Wankel Cart engine that was
mentioned here a while back.

http://www.nova-racing.com/nova_gb/index.htm

I started pondering making one of these things as a two rotor - seems
perfect - starts out water cooled and it looks like it might be p-port.
The only thing I think I don't like are the roller bearings..

The thing that stuck out when looking at the pics is that the rotor is
so wide compared to it's other dimensions.

http://www.nova-racing.com/nova_gb/Preise/Einzelteile_Orig/XN079%7E6.JPG

I imagine this is how the 16B rotors might look...

I think trying to convert one of these to a two rotor might be
preferable to converting a 13B to a single rotor, and might end up in a
similar (slightly lesser) horsepower range. A complete single rotor
weighs less than 40lbs. It seems that a 92hp 2 rotor might weigh around
75lbs - light! A 90hp Continental weighs 180lbs+..


Matt-

Yes it sounds like a better idea than a one rotor 13B.

--
Paul Lamar ...No rotor no motor.


Matt,

That's a nice little engine. How would you combine two of them, bolt
the shafts to one another?

What about the crankcase intake? Wouldn't that be in the way to
bolting them together end-to-end?

The specs say 31 kilowatt, which is 41 hp, so two would be 82 hp.


Regards,

Gordon.


Matt,

These engines are so small you could almost mount them side by
side both feeding into a small PSRU.

Doug


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.