> Gentlemen,
> > > Here?s an alternative for a cost effective ITB setup that could be
> retrofitted to our 13B?s. A few Honda guys are having great success
> using the GSXR throttle bodies on their NA motors.
> >
http://www.homemadeturbo.com/tech_projects/itb/index.html
> > > > Paul C
> > What size are these Paul? How much HP does the
> engine they came off have?
> Paul Lamar ...No rotor no motor.
Almost the same setup as the 550/750 Honda in line fours, Virg
Maybe 100 HP???
Paul Lamar
Paul,
For reference the 1996 750cc GSXR I own using carburators (4) was listed
at 128HP. My guess is probably an honest 120-125. The 1000cc version was
rated at around 150! The 750 has a 13,500 RPM red line. The later FI
bikes I'm not sure but rarely does the HP rating go down.
Bill Jepson
The 750 and 1000 GSXR Throttle Bodies measure 42mm @ the butterflies.
150 HP for this '03 crotch rocket. I read in another Honda forum that the
GSXR 600 has slightly smaller bore at butterflies, 38 mm. This should work
nicely though if we use 2 throttle bodies into a 2" peripheral runner.
http://www.motorcyclistonline.com/roadtests/122_0307_2003_suzuki_gsx_r1000/
Paul Chang
42 mm is too small plus you have four butterflies to create aerodynamic
drag instead of one. Most people are looking for at least 200 HP and
not 150 HP. No doubt it is cool looking but I'll also bet it is
not as cheap as a slide throttle and P-ports.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.