Subject: Planetary gear, bearing load
From: Rotary Engine
Date: 11/28/2006, 1:10 PM
To: AA-me


Paul,
I think I know what is driving your intuition about what is happening
when the planet gears are moving.  Let's define a term that I'll call
"frequency of tooth contact" or maybe "duty cycle".  Although the pitch
line velocity is determined by the rotation and diameter of the sun gear
and is invariant,  the "duty cycle" of a given tooth on the sun gear is
changed by movement of the planet.  When the planet gear moves in the
direction of the sun gear, a given tooth on the sun gear contacts the
planet less frequently than it would if the planet were stationary.
Let's use the Bell 47 unit as an example with its 46 tooth sun, its 23
tooth planets and its 92 tooth ring gear.   Think of one of the planets
in the Bell 47 unit starting at the 12 o'clock position.  Mark the 12
o'clock tooth on the sun gear as tooth #1.  Now rotate the sun gear
through one revolution, or 46 teeth.  If the planet gear were
stationary, the #1 tooth would be back at 12 o'clock and make contact
again with the planet gear.  But, the planet gear has rolled through 46
teeth on the ring gear and is now at the 6 o'clock position.  So, since
the #1 tooth on the sun is "chasing" the planet gear around the ring
gear, the "duty cycle" for tooth #1 is less than it would be if the
planet gear were stationary.  And, your intuition is vindicated!   If
Doug paints some dots and takes photos, I think it will be very helpful.

Aubrey

Aubrey,

Yes, that is a good explanation as well.
The only little difference is that the sun gear has to rotate 1.5
rotations from its original position to have moved 46 teeth relative to
the planet gear and the #1 tooth will meet the planet gear at the 6
o’clock position.

This is also apparent as the ratio is 3:1, so for .5 rotations of the
planet carrier, the sun gear will rotate 1.5 rotations.

Rolf


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.