Subject: The turbo prop verses the turbo compound rotary.
From: Rotary Engine
Date: 11/28/2006, 5:25 PM
To: AA-me




    Paul,

    I wonder if you are focusing on the bearings in the planetary
    shafts? Then
    you would have a point. They would be doing elliptical loops around a
    circle.

    I'll go down to the office tomorrow and paint some white marks on the
    different gears and take four or five pictures of what happens
    during one
    revolution of the sun gear. Like the rotary it was hard to get my head
    around. This question is going to come up again and again so with Rolf's
    explanations and picture proof it would make a good addition to your
    website.

    Meanwhile have a look at this NASA report on unducted fans. The last
    part is
    especially revealing about the issues that keep a 'good technology' from
    coming to market. The author speaks about 'reverse salient issues'
    Poignant info concerning the rotary and even the rotary turbo compound.

    http://history.nasa.gov/SP-4219/Chapter14.html

    DougFir

    They underestimated the noise problem. Barely mentioned in this
    paper. It was so bad that it affected the structure of the
    airplane. GE felt they would have to add weight and cost to the
    AC structure to counter the noise problem which off set the
    20% fuel savings. BTW the fact that GE actually built
    and flew the unducted fan full scale yet again proves private
    innovation beats big gov bureaucracy every time.

    Not really a good analogy with the turbo compound rotary.
    There are no downsides to the turbo compound rotary compared
    the smaller turbo prop engines. It has everything going for it with
    the SAME noise. Less acquisition cost being a major advantage.
    50% fuel savings being another. Only the weight issue is still
    in question and the other shoe, namely the weight of an all
    aluminum or some other alloy large rotary, has not dropped yet.

    The real price of fuel over the years on average taking
    into consideration inflation has remained pretty much the same.
    What happened in 1973 as the price of fuel oil went up so did
    everything else including wages. When I was a kid the cost of a loaf
    of bread was about 20 cents, about the same as a gallon of fuel.
    Now the cost of a loaf of bread is still about the same as
    a gallon of fuel. If anything bread is now probably more
    costly. Hybrid car sales are down if not dying.

    I see no end to this cycle in our life time. Since Iraq is sitting
    on the worlds second largest known reserves of crude oil
    when they finally get finished killing each other off and this
    huge source of crude is fully developed the real price will
    drop yet again. IMHO a major factor, frequently not mentioned
    in the sectarian war, is who gets to control the Iraq oil.

    Waiting in the wings when crude oil pumped from the ground actually
    (if ever) becomes a reduced source (hasn't happened yet) is the
    Alberta, Utah, Wyoming tar sands.

    Paul Lamar

    The Rotary Engine NewsLetter. Powered by Linux.
    ACRE NL web site. http://www.rotaryeng.net
    Copyright 1998-2006 All world wide rights reserved.

    Oops, forgot to attach the pic of the NASA and GE propfans.

    Regards,

    Gordon.

The two on the right are actually the GE concept
and not the NASA concept despite the NASA logo on the
cowl. I saw the test airliner with the unducted fan on it
out at Mojave where GE has a full scale test facility.
Unfortunately I did not hear it run.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.