Subject: seven blades, carbon fiber, scimitar props ?
From: Rotary Engine
Date: 11/30/2006, 8:40 PM
To: AA-me


>>>> Applying today's technologies might be
interesting
>>>
>>> to
>>>
>>>> see what happens...
>>>>
>>>> 1. Scitimar props are available now.
>>>> 2. Carbon fiber has certainly reduced the
weight
>>>> 3. Six, seven and even nine blade props can be
>>>
>>> found
>>>
>>>> Note: Seven blade is the quietest of all
>>>
>>> combinations
>>>
>>>>
>>>> David Mathes
>>>
>>>
>>> Sounds interesting, any ideas of any to see ?
>>>
>>> jofarr, soddy tn
>>
>>
>>
>>
>> For COTS, http://www.warpdriveprops.com/
>>
www.aircraftspruce.com/catalog/appages/warpdrive.php
>>
>> Prop adjustment
>> http://www.ivoprop.com/inflightmagnumodel.htm
>>
>> For custom, Dowty Propellers is the leader.
>>
>>

www.smiths-aerospace.com/Systems---/Propellers/index.asp
>>
>> Picture of SAAB 2000 attached
>> The six-bladed propellers are constant speed with
>> auto-feathering and reverse pitch.
>>
>> David Mathes
>>
>
>
>  David,
>
>
> I've seen these multi scimitar type props mostly
on turbines.  Would > there
> be any advantage to using them with prop output
speeds of 2000 rpm > driven by
> a rotary wankel engine?
>
>
> Doug

Ive been watching the development of the carter
copter for a few years-
fascinating stuff.  They have also been working on a
scimitar prop
prototype that looks very promising at
http://www.cartercopters.com/propeller_system.html

Mike Parker


Mike

Carter appears to be on an amazing journey where a
propeller driven plane COULD fly at 500 mph, based on
the use of scimitar technology.

From the site...

"At a μ of 1 the forward speed of the aircraft
and the tip speed of the retreating blade are equal,
therefore, the air velocity at the tip of the
retreating blade is zero and there is reversed airflow
over the entire length of the blade."

"Carter technology should allow flight speeds up to a
ratio of μ=5 (where the aircraft is traveling at
speeds up to 500 mph and the tip speed of the
advancing rotor blade remains under mach 0.9)."

David


I'll believe it when I see it. They have been fooling
around and crashing for years. The Carter style props
were tried by the Horten brother pre WW II. Klaus also
tried one a few years ago. Apparently the air is confused
around the root or has low energy so having a wide cord
with a lot of camber in that area does not pay off.
Unless of course your cooling scoops are right behind
that area of the prop. In that case cuffs also work.

If you are stuck with high RPM and two blades a wide
cord is necessary to absorb the engine HP.

If there was real merit, as far as prop eff. was concerned,
there would be more of them  around by now.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.