> Do you think the Kinsler nozzles would work in the RX8 intake
   manifold
    > injector holes or do they have to be in the main air stream? Karibian
    >
    >
    > I think they have to be in the air stream.
    >
    > Paul Lamar ...No rotor no motor.

   Perhaps an e-mail or call to them would be beneficial.
   They have been very good at problem solving for our
   race engines, without a sales pitch. Every system sent
   to them for rework and calibration, has come back so
   well set up that we hardly turned a screw upon installing.
   Archie


   Karibian,

   I would suggest downloading the catalog and looking at the various
   nozzles shapes and sizes they offer. If you can find a shape and
   size similar to the EFI nozzle on the RX8 engine, I don't see why it
   should not work.

   The key thing is that it should spray fuel into the runner the same
   way the stock nozzle does -- not spray it onto the runner wall
   because it's too short or whatever.

   The other thing is how you will thread it in. It may not be the same
   size hole or thread. If the existing hole is smaller you may be able
   to enlarge it and rethread it so the Kinsler nozzle will fit.

   Regards,

   Gordon.



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.