Subject: Low cost positive displacement gear pump
From: Rotary Engine
Date: 12/8/2006, 10:49 PM
To: AARotary Engine

   Here you go McMaster Carr. $157.
   2.2 GPM or 132 gallons an hour at 0 psi.
   Way more than enough.
   Up to 100 psi. They don't say what RPM
   but I suspect it is 1725 RPM which
   is what it is with motor.
   You will still need a 4 to one reduction.
   two inch pulley on the e-shaft and eight inch
   pulley on the pump. You might get away with
   running it 1/3 as fast 2333 RPM or a 2" to 6"
   pulley. You still might need a Facit boost
   pump to prime it but the engine should stay
   running if the electrical system fails
   in flight.

   --
   Paul Lamar ...No rotor no motor.

   Bingo!

   Now we have everything we need to put together a mechanical constant
   flow FI for a few hundred bucks.


   Regards,

   Gordon.




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.