This two inch ID silicon hose is hard to find.
Probably very expensive at around $1 and inch.
Useful for p-port engine two inch OD intake runners.
More to come. Well worth it to download the 75 meg hi rez
catalog. Took two hours on my cable modem.
> Paul Lamar
You must have a loaded router somewhere in your route to Kinsler. I
got it in under 5 minutes, also with a cable modem. And yes it was the
hi-rez link! :)
They do have a lot of interesting stuff in there. Do they have prices
listed somewhere?
Bob W.
--
N93BD - Rotary Powered BD-4 -
http://www.bob-white.com
First Flight: 11/23/2006 7:50AM - 0.7 Hours Total Time
Cables for your rotary installation -
http://www.roblinphoto.com/shop/
You guys must be in the boonies. Here in SoCal we have a zillion
people on the cable.
So far I have not been able to find the prices.
Here are some handy trumpet mouths that fit pretty
close to two inch OD 1-7/8 ID tubing used in the p-port.
These are a bit smaller so .032 needs to be machined or sanded
out of the ID.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.