Subject: join the aircraft rotary engine news letter
From: Rotary Engine
Date: 12/9/2006, 2:22 PM
To: AARotary Engine



I have been doing a lot of Internet searching for data on rotary
engines used for kit planes.  I found your reference to the news letter
in an article you wrote, "The incredible Mazda Wankel rotary engine",
copyrighted 1988-2004.

I want to receive any data that is "published" in the news letter.

I am particularly interested in the development of the Renesis RX8 side
port engines being built by the 4 person group in Irving, TX.  In
automotive form, they have what seems to be a reliable 390 hp/290 ft.
lbs from a standard 2 rotor.  I don't know what modifications I would
have to make to make it "flyable."  I am hoping to follow up on this
turbo version in your news letter.

My brother and I are building, albeit slowly, a dyke delta in Tulsa, OK
and need an engine that will not be too heavy, but still deliver enough
power to make the delta a cross country flyer.



Thanks,
Chuck Spry, EdD


I think this is the car you are speaking of.
http://www.rotaryeng.net/Turbo-RX8a.jpg
This much power is not recommend for aircraft
use out of a two rotor however a three rotor should be
fairly long lasting at this power level.

We have at least two rotary powered Dyke Delta flying. One some
place in Massachusetts and one in Los Cruces NM.
http://www.eaa27.org/projects/maher/
Strange not one word about the rotary on this web site.


If you can't find them here let me know and I will search
the archives for their addresses or email addresses.
http://members.aol.com/rotaryroster/index.html?f=fs
Also bob White might have the address of the guy in
Los Cruces.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.