Gordon,

   I noticed that the outside air temperature at altitude does not change
   (and cannot be changed), even when the temperature at sea level is
   varied. Shouldn't the temp in F at altitude be adjusted as the input
   for sea level temp is changed? For example, if the sea level OAT rises
   to 100 degrees F, I do not think that the temp at 1,000 feet will still
   be 55 degrees F.

   Bob Rogers

   Bob,

   That's a very good point.

   That would certainly be a useful addition and I will try to
   implement it. It may be possible to give an "adjusted" value for
   whatever temp the user enters. I will see if I can implement that.

   I'm also going to add a couple of more usefulf features -- I want to
   improve this and make it as useful as possible.

   It's a work in progress...

   Thanks very much for the helpful suggestion.

   Regards,

   Gordon.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.