Subject: Aluminum prepartion for bonding
From: Rotary Engine
Date: 12/13/2006, 9:38 PM
To: AARotary Engine



I found this kit in the local marine supply
place. Good for making p-ports.

-- 
Paul Lamar ...No rotor no motor.

Paul, looks like this nothing more than alodine kit? I read one guy
was using JB Weld, but he first opened the tubes from the big end
(cut the bottoms off)
Than heated both tubes in 150F water. Mix and pour around the inserts
when still hot. Thinner mixture will seep better in all the pores and
bond better than cold mixture.
Buly

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.