Hi Paul and co.

Thanks Paul for the the list, it's helpful.

I'm wanting to nail down the PSRU for my Renesis 4 port powered Glasair
Super II.

Is it possible to realistically build a drive cheaper than Tracys RD-1C?
And if so is there tried and tested units flying (significant hours)
with full design specifications available?

If the answer is clearly no, I'll place an order with RWS.
Thanks for the help.

Steve Izett
Perth, Western Australia

<http://www.rotaryaviation.com/RD-1C.htm>

Probably not unless you have a complete machine shop at
your disposal. Don Dunbar's buddy built one in Perth.
His buddy's machine shop was out in the out back sort of
behind his house. I forgot his name but Dave Mccandless may
know him. If you can get him to make a second one it would
probably be cheaper.

Here are some pictures I took when I was in Perth.
Don himself is probably God knows where in the world. He travels
a lot.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.