You reference the 3 rotor rotary engine. Where are the 3 rotor engines
available? The idea of a 400 horsepower engine is unbelievable. There
are several composite kit planes that recommend 350 horsepower for
maximum performance. The 3 rotor should weigh less than the 540 or 550
cu. in. flat 6 engines. And they should use less gasoline in flight.
Are there EFI and dual ignition systems available for aircraft
applications for the 3 rotors?
Sorry to be so uninformed about rotary engines.
Chuck Spry
Three rotors were only made by Mazda for a few years in the
early 1990's. Genuine three rotor engines are getting rare.
However there are people out there making
main bearing kits for the regular 13B intermediate housings
so three rotor engines can be built up using almost all two rotor
parts. Except of course for the custom e-shaft. The same thing
can be said for a four rotor engine.
Any Mazda engine will burn about 5% more fuel than a properly
leaned aircraft engine but the fuel is 25% cheaper as a rotary
will burn just about any auto gas while recent new aircraft
engines (last 20 years) are limited to 100LL.
EFI and dual electronic ignitions are available. People
are just now getting around to wanting something simpler, more
reliable and cheaper. Namely carbs and mags.
Paul Lamar ...No rotor no motor.
Paul,
Can you recommend web-sites and /or makers for the 3-rotor e-shaft?
--
Erik Snyman
Messina
South Africa.
http://www.xtremerotaries.com/
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.