I have two engines. One is a 200 HP V6 at 4500 RPM.
The other is a 200 HP rotary at 7000 RPM.
The V6 has a 1.66:1 PSRU.
1)What is the torque of the engine at 4500 RPM?
2)What is the torque at the prop?
The rotary has a 2.59:1 PSRU.
3)What is the torque of the engine at 7000 RPM?
4)What is the torque at the prop?
A question for the advanced students only. Both props are 80%
efficient.
5) What is the V6 engine thrust at 150 MPH?
6) What is the rotary engine thrust at 150 MPH?
If one answers 1 through 4 correctly one gets a B.
If one answers 5 and 6 correctly one gets an A :).
Paul Lamar ...No rotor no motor.
---------------------------------------------------
1) torque = hp*5252/RPM = 200*5252/4500 = 233lb-ft.
2) torque = torque*PSRU_ratio = 233lb-ft*1.66 = 387.4lb-ft
3) torqueE = hp*5252/RPM = 200*5252/7000 = 150lb-ft
4) torqueP = torqueE*PSRU_ratio = 150lb-ft*2.59 = 388lb-ft
Hey! That's pretty neat! Same horsepower, same prop RPM,
same prop torque...
Prop RPM = ~2700
Still working on 5) and 6), but I think they will generate the
same amount of thrust..
Matt-
------------------------------------------------
Matt gets a B +.
--------------------------------------------------
1) torqueE = hp*5252/RPM = 200*5252/4500 = 233lb-ft.
2) torqueP = torqueE*PSRU_ratio = 233lb-ft*1.66 = 387.4lb-ft
3) torqueE = hp*5252/RPM = 200*5252/7000 = 150lb-ft
4) torqueP = torqueE*PSRU_ratio = 150lb-ft*2.59 = 388lb-ft
Hey! That's pretty neat! Same horsepower, same prop RPM,
same prop torque...
Prop RPM = ~2700
Still working on 5) and 6), but I think they will generate
the same amount of thrust..
Matt-
5) & 6) T = hp*Np*550/V = 200*0.8*550/(150*1.467ft/sec) = 400lbs
(I snooped around until I found the thrust equation from:
http://www.allstar.fiu.edu/AERO/Propulsion2.htm )
Matt Prather
---------------------------------------------------
Matt gets an A on his second try.
---------------------------------------------------
1) (200*5252)/4500=233
2) (200*5252)/(4500/1.66)=388
3) (200*5252)/7000=150
4) (200*5252)/(7000/2.59)=389
5) = 6) = drag of the airplane
--
Blake C. Lewis
-------------------------------------
Blake gets a B+ for knowing drag equals thrust at a constant speed.
----------------------------------------------------
Paul
Here are my guesses to your quiz
1. 233lbs
2. 387lbs
3. 150lbs
4. 388lbs
5. 310lbs
6. 310lbs
Andrew Martin
---------------------------------------------
Andrew Martin gets a B.
------------------------------------------------
Thought I would take a minute and take part in the quiz...
It's just a simple matter of unit conversions, right?
A1. 233.5 ft-lbs
A2. 387.6 ft-lbs
A3. 150.1 ft-lbs
A4. 388.8 ft-lbs
A5. 400 lbs
A6. 400 lbs
Heath Holbrook
------------------------------------------
Heath gets an A.
Thanks guys for taking the quiz.
Looks like we need to take some more time on the physics
of torque and HP because so few people responded.
Paul Lamar ...No rotor no motor.
------------------------------------------
I would like to know more about how thrust, hp, and airspeed
relate to each other.
The Eggenfellner list is reporting 1000 pounds static thrust.
What conclusions (if any) about the engine can be drawn from
this limited bit of information.
--Sandy
Static thrust only affects the initial acceleration of the
aircraft. In the over all performance of the the aircraft
it is meaningless. In fact with a fixed pitch prop optimizing
for static thrust can have dire consequences when it comes to
climb out speed. There was a guy in AZ that optimized his
Suzuki powered aircraft for static thrust and could not climb
out of ground effect. He hit a tree and died.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.