Subject: Some interesting additions to the power to weight ratio chart
From: Rotary Engine
Date: 12/18/2006, 4:16 PM
To: AARotary Engine


Some interesting additions to the power to weight
ratio chart.

-- 
Paul Lamar ...No rotor no motor.



Paul

Can you describe what you are using for weight. Is it
just the short block rotor system or does this include
all the stuff (radiators, exhaust, etc.)

Also, where in the 20B can weight be further reduced
with ligher weight metals, carbon fiber, ceramic,
foam, nanogel, etc.

David

Scroll down on this picture.
The main weight saving on a 20B would be to switch
the end housing from cast iron to aluminum. On the 20b that
could be as much as 75 pounds.
-- 
Paul Lamar ...No rotor no motor.


Paul,

My single rotor is now 90lb naked, adding radiator and oil cooler with 10lb
is 100lb at estimated 115hp(hopefully). Even at 100hp it would beat
everything else, just like the other rotaries.

Richard Sohn
N2071U



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.