Subject: Nasa compuond rotary papers
From: Rotary Engine
Date: 12/20/2006, 10:25 PM
To: AARotary Engine



   Just thought I'd pass this along. Please subscribe me to your news
   letter.

   http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19920011408_1992011408.pdf
   <http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19920011408_1992011408.pdf>
   Joshua Thompson

   Thanks for the NASA tech paper URL Joshua.

   Typical NASA paper study. Garbage in garbage out.

   NASA needs to start testing real hardware and stopping passing
   money out to people doing erroneous paper studies based on other
   erroneous paper studies. For example; the so called "BASELINE"
   60 HP engine they used for this study had only a 90% VE at 6000 RPM.
   Apparently this paper engine is the figment of someone's
   imagination. The stock Mazda  RX8 engine has 100% VE and a p-port
   Mazda 13B engine is 120% VE. In other words no allowances were
   made for intake and exhaust tuning.

   I suggest they buy a real Mazda RX8 engine
   and study it for a change. I'll bet that would cost one tenth
   of what they spend on paper studies.

   Paul Lamar ...No rotor no motor.

---------------------------------------

It looks like they did:

http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19960003430_1996103430.pdf

Jeffrey Martin

------------------------------------------------------
Yes it does LOOK like they did but it is only a
computer simulation. As such lots of factors were not taken
into consideration such as detonation. They were simulating
a hypothetical stratified charge engine running at equivalence
ratio of up to .65 which is an air fuel ratio of about 22:1
which is very lean.

BTW The CW, John Deere, RPI direct injection stratified charge
engine never worked as expected when they tested it in real
hardware. Despite spending millions of dollars on the design over
a period of 30 years. The reason is  they were unaware of what
really was happening in the combustion chamber. There was no way
to see what was happening in there. You can't make a rotary engine
out of glass and see the air and fuel molecules moving around.

The stock Mazda engine will run super lean at moderate to high
RPM anyway. Tracy thinks, and I agree with him, it is due to
natural stratified charge because the combustion chamber is
rotating at high speed throwing the rich part of the mixture out
towards the spark plugs. They don't or can't simulate that.
We get exactly the same .47 BSFC as the direct injection stratified
charge engine merely by leaning out the mixture.

There is no substitute for putting real hardware on a dyno
or in an airplane.

Mazda did it right. They computerized the dyno  and the
data gathering and proceeded to test the myriad combinations
and permutations in real hardware starting in the late 1960's.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.