Just thought I'd pass this along. Please subscribe me to your news
letter.
http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19920011408_1992011408.pdf
Joshua Thompson
Thanks for the NASA tech paper URL Joshua.
Typical NASA paper study. Garbage in garbage out.
NASA needs to start testing real hardware and stopping passing
money out to people doing erroneous paper studies based on other
erroneous paper studies. For example; the so called "BASELINE"
60 HP engine they used for this study had only a 90% VE at 6000 RPM.
Apparently this paper engine is the figment of someone's
imagination. The stock Mazda RX8 engine has 100% VE and a p-port
Mazda 13B engine is 120% VE. In other words no allowances were
made for intake and exhaust tuning.
I suggest they buy a real Mazda RX8 engine
and study it for a change. I'll bet that would cost one tenth
of what they spend on paper studies.
Paul Lamar ...No rotor no motor.
Paul,
Are those VE figures you mentioned accurate?
I'm revamping my turbo sizing spreadsheet and want to use accurate
VE. I had guessed that P-port was maybe 110 percent. I can believe
120, but just want to be sure.
Regards,
Gordon.
Yes. They got these number years ago.
It assumes tuned length intake and exhaust runners.
Abel Ibarra was able to achieve 800 HP with a stock
tuned intake system and a turbo charger. Side ports
no less. He is now looking at 500 HP per rotor
with P-ports I suspect but he is a bit secretive.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.