Subject: How to add a P-port to the RX8 and keep the EPA happy.
From: Rotary Engine
Date: 12/26/2006, 8:21 AM
To: AARotary Engine


This is in addition to the side ports.
Basically what we are doing here is pivoting a section
of the rotor housing trochoid  wear surface up while
opening a large P-port.

It only opens at full throttle and
high RPM. Over 6000 RPM. The rest of the time it seals
the exhaust gas from the intake ports for smooth low RPM
running and low HC emissions. Just like the current
RX8 engine. No port overlap at low RPM.

On a 16B this would be spectacular. My guess
is somewhere close to 400 HP. A real Corvette
eater for half the price and no increase in RX8 weight.

-----------------------------------------------
I redid  the 3D for hopefully a clearer picture.
Second attachment.

This will work on an RX8 engine as well. My guess is
300 HP while still meeting all EPA regulations.
I call it the Trap Door P-port.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.