diesel engines. Diesel engines have way less waste
piston engines and rotaries. Despite this they were able to
--
Paul Lamar ...No rotor no motor.
Paul
I would strongly recommend this type design as apposed to the direct drive
shaft off the turbocharger. I realize the direct drive may be lighter, but I
firmly believe that a second turbine for the recovery is the quickest and
safest way forward, as it has been proven and eliminates the development
time necessary for a solid very high speed shaft and any other unforeseen
issues that we have not taken into account.
Giff Marr
The fact of the matter is most car turbo chargers are putting
out twice the power necessary for the compressor alone.
This is done for compressor acceleration reasons. Rapid
acceleration of the compressor is essential for car applications.
It is far cheaper and lighter weight to take advantage of this
fact if it can be done. Also there are some heat losses in
the first turbine. We know a second turbine will work.
Too easy :)
Paul Lamar
Paul
We are really looking for something quickly, that will demonstrate the
superior performance of the rotary and provide us increased HP and lower
fuel burn. Don't disagree with your desire to optimize the system, but make
the first BIG step turbo-compounding with dual turbo's and continue the
direct coupled turbo in development. Again, I firmly believe direct coupling
is going to be a much bigger development project then you realize, unless
you have a secret source of information on super high speed shafting.
Giff Marr
Perhaps. The input shaft is extremely short for a high speed shaft
at only 1.5 inches long. Some of that is flexible coupling. I see
no problems with that.
It is not easy building a gear box and shaft for the second turbine.
Turbo chargers have all that worked out and off the shelf.
Never the less do some 3D's for what you have in mind for a second
turbine arrangement.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.