Subject: For Sale PS-215 HP p-port 13B
From: Rotary Engine
Date: 1/6/2007, 9:44 PM
To: AARotary Engine

I recently bought a RV-8A project that has a mounted PS-215 13B with a
PSRV-300 reduction drive and complete firewall forward
equipment  (radiator, alternator, starter, ceramic coated exhaust with
ducting, oil cooler, custom molded cowl, engine mount, 2 ECUs, etc.).
It was all purchased new several years ago from Powersport Aviation,
Inc. and has not been run (all zero time).

Initially, I was enthused with the possibility of having something
better than what  you refer to as a reciprosaur but after researching
and reading your newsletters, I have come to the conclusion that I do
not have the necessary knowledge to get this engine running and then
maintain it in the way it should be to safely fly with it.  There is no
one locally to help me with it, so I am thinking that I need to change
it out for a conventional aircraft engine; however, before I make a
decision I need an opinion regarding its marketability and ball park
value and believe you may be the most knowledgeable source for that
information.  If you can help me with this I would greatly appreciate it.

Thanks,

C. C. Chamberlain
536 Applejack Dr.
Shreveport, LA 71115
318 797-3230 Hm
     465-2346 cell


Well the best thing we can do is put it up for sale
and see what kind of offers you get. That is fine set
of equipment assuming the engine has been properly
protected.

Start by taking digital pictures of everything and send them to us.

If you want to proceed assembling it you can get the finest help
available for doing it on here. It is not that complicated
or that hard.
-
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.