Subject: The gear ratio question (2)
From: Rotary Engine
Date: 1/11/2007, 6:42 AM
To: AARotary Engine



   Hi Tim,

   There is a popular misconception that a rotor "spins around" in its
   chamber, somewhat like a centrifical vane pump. The vane pump is a
   single axis device. While the rotor does "spin around" its axis it also
   orbits the e-shaft centerline simultaneously. While both these functions
   are happening something has to prevent the rotor from just clabboring
   around inside the chamber. THIS IS THE TIMING ISSUE and the gearset is
   what acomplishes this coordination of action, making sure the correct
   rotor face is going toward the spark plug area as another is pulling
   away from the intake area, etc. The ratio that gets this done is
   critical to the design, ie change the ratio and a different housing
   inside shape would be required. Remember all the while this whole mass
   orbits the e-shaft centerline. The offset or E-centricity (about 15mm)
   of the E-shaft is somewhat equivalent to the crankshaft throw of a
   piston engine (about 120 plus mm), so the POWER of combustion in the
   rotary's chamber is pushing only about 1/8 of the distance away from the
   power output axis compared to the piston engine crankshaft. Accomodating
   this 120mm throw is why crankshafts break but with only 15mm to
   accomodate, the e-shaft can be very robust.

   Please note that these are hard metal relationships and have nothing to
   do with variable relationships such as when the spark goes off, or when
   the fuel is admitted, or when the exhaust is expelled. All these events
   are obviously necessary but they all have their own "timing"-- spark by
   distributor drive (vary by distributor rotation) ,fuel by port placement
   (Vary by material removal, or even move entire port to housing
   periphery), and exhaust out by port placement (rarely varied,but
   possible)

   When all else fails visit www.kevenly.com/wankel.html


   Much clearer now right Tim. AAAH TIM
   Right? Dave



Dave,

Your link doesn't work.  ??

Allen Slominski


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.