Subject: best Wankel animation: Eureka!
From: Rotary Engine
Date: 1/11/2007, 9:54 PM
To: AARotary Engine



                 This is the best animation in terms of showing both the
                 shaft and the
                 gear. The crank is misleading in relation to the
   actual way
                 the engine
                 is built, but easier to understand than a lobe hidden
   inside
   the
                 rotor. -Jeff

                 http://britton.disted.camosun.bc.ca/wankel.gif
   <http://britton.disted.camosun.bc.ca/wankel.gif>

                 Yes. That is very very good. Break through in
   animating the
                 Wankel IMHO. However the rotor is shown speeding up
   and slowing
                 down which does not happen.


                 Paul Lamar ...No rotor no motor.

                 The Rotary Engine NewsLetter. Powered by Linux.
                 ACRE NL web site. http://www.rotaryeng.net
                 Copyright 1998-2006 All world wide rights reserved.


             It doesn't seem to speed up nor slow down on my computer.  In
             fact, I wish it would go slower.  Does anyone know how to
   adjust
             the speed of an animated gif?


             Matt-


         Nevermind..  I figured out that I can adjust frame rates in
   gimp...


         Matt-

   It started out at 60ms per frame..  Here it is at 200ms/frame (attached
   *slower):

   And at 400ms/frame (attached *slowest):

   Matt-

   I've got it.

   The slowest illustration is just right for my brain, though the
   second-slowest works, too.

   Tim Kern


Good..  Yes, even slower might work better for my brain.

In the browsers I use, pressing escape stops the animation.
Reloading/refreshing it restarts it the animation.  I find that useful
for even better understanding.

I notice that the eccentric "points" at the firing event every time the
spark plug fires, at the exhaust port at the end of the exhaust stroke,
at the intake port at the beginning of the intake stroke.

The eccentric's "point" transitions from one rotor face to two rotor
faces forward (or once rotor face back) every revolution of the e-shaft.


Matt-


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.