Subject: Alaska GlaStar.... help needed from all the professors online
From: Rotary Engine
Date: 1/12/2007, 3:27 PM
To: AARotary Engine


>> > Thanks for all the responses thus far.  I don't really want to have the
>> > engine torn down, but I would rather try and get it right the first
>> > time.... so if I can p-port my engine now(as in shipping it somewhere
>> > reliable...  I do not have much in the way of machining tools) without
>> > to much difficulty and then use a slide throttle that would be great.
>> >
>> > I plan on going on floats one day and short gravel strips up here
>> > require the higher hp for takeoff.  I am not too concerned about
>> > cruise.  I will be lucky to see 120 kts with the 26" tundra tires and
>> > 105kts with floats.
>> >
>> > You can all call me K11, a nick name I got from the Guard.....
>> > Kvernplassen was to long to put on the flight scheduling board so they
>> > just put K+11, which then just got shortened to K11.
>> >
>> >
>> > Attached is a couple of pictures of the plane and engine
>> >
>> > thanks, Paul K
>> > K11
>> > N227ZZ reserved
>> >
>> > Looking good Paul. No need to tear down the engine unless
>> > you p-port it. With a Glass Star I think 150 to 180 HP
>> > should be fine. What part of Alaska are you in?
>> > I have flown up there and back once. Rented a plane in
>> > Anchorage once. And flew to Yellowknife and back once.
>> >
>> > -- >> > Paul Lamar ...No rotor no motor.
>>
>> K11,
>>
>> Wow that looks nice and you will find that to be a great plane for what >> you
>> have in mind. I think you will find the rotary will work perfectly. I did
>> the flight test programs on three Glastars. The first had a home made EJ >> 22
>> conversion with a Ross and Warpdrive prop. This was probably around 135hp
>> and was very light, performance is great. Second one had a IO-320 and >> every
>> bell and whistle you can imagine. Performance was not as good as the Soob
>> and compromise was a key component of flight planning. Still a nice >> plane.
>> The third had an NSI engine and inflight adjustable prop. This one was a
>> taildragger and a very well behaved one at that, very easy to handle on >> the
>> ground and take-off and landing were very straight forward. The >> performance
>> on this one was also quite good, I liked the prop, I would coarsen the >> prop
>> to keep the rpm down and fly WOT. Also great  fun backing into parking
>> spots.   The NSI has a spur gear reduction which I have some reservations
>> about, but it is still holding up well. Of the three it would be a toss >> up
>> between the first and third, I like the taildragger and adjustable prop >> but
>> the perfomance, light weight and economy of the first one I think hold a
>> slight edge. This is Jeffs website, http://www.liot.ca/index.htm , the
>> builder of the first one. He makes some bits for Glastars and I think >> you'll
>> find some interesting reading. I would sure like to try one on floats and
>> they are the best slipping a/c have flown. Keep it light.
>>
>> John Gibbons
>
> John,
>
> I am hoping to come in light....  one of the reasons I chose the rotary.
>  I have several of Jeff Liots parts.  He has some really nice stuff for
> GlaStars.  I have floats now for the plane, but do not plan on putting
> them on until I have a couple hundred hours on wheels.  I don't want to
> learn to many things at once.
>
> K11
> Paul Kvernplassen

Yep Jeff does beautiful work. His was the first kit they sold and at the
time they still didn't have all the parts available, he ended up making some
of their moulds for them in exchange for some of the fancier "Glastar"
parts. I keep trying to convince him to build some floats for his. Two
hundred horse will be huge power for that airplane especially if you manage
to keep it light. Also you will find the Glastar to be a very quick learner,
the taildragger one was built by a couple of brothers and they were flying
that one consistently well in just a few hours of circuits, certainly easier
to land than my C140.

John


With floats you need a lot of power and a large diameter
prop. Ken Welter uses nitrous oxide for an extra 100 HP to
get his 3000 pound Coot up on the step and out of the water.
Either that or an expensive variable pitch prop.

Paul Lamar


I am really looking forward to the day I can go flying.  I have a couple
hundred hours of taildragger time in a Stinson, a very forgiving
taildragger.  I hope the GlaStar is the same.

I have an inflight adjustable prop from Vesta on order.
wwuw.vestav8.com   It is 82" so should do the trick.  An extra hundred
horse instantly available sure sounds intriguing!!!

K11

Here are some pictures of Ken's Coot.

Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.