>      >
  >      > Are there any plans for making a model to fit the 20B?
  >      >
  >      > Robin


  >     No current plans, but I would be willing to do it given enough
  > interest.
  >     Anybody besides Robin interested? Is the port spacing for the
third
  >     rotor the same as for a two rotor?
  >
  >     UPDATE: I visited the machinist this noon. He is half done doing
the
  > NC
  >     programs. I forgot to ask about the tooling/fixtures. He said he
  > expects
  >     **some** of the parts to be machined by Monday. He found a shop
to do
  >     the
  >     PFTE (Teflon is a trade name) as they have the experience and
would
  >     probably
  >     be cheaper. Also waiting on materials.
  >
  >     Doc Custer
  >     Retired Software Engineer and sometime Audiologist
  >
  >     Doc,
  >     Yes, I would definitely be interested in a 20B slide throttle. I
know
  >     of one other person that has expressed an interest.
  >
  >     Mark Steitle
  >     Lancair ES/20B

  > I'd be interested in the slide throttle for the 20B.  My plan is to
use
  > a 20B for a BD-4C.  Finding the engine might take some time though
as I
  > have not started the project yet.
  >
  > Allen Slominski
  > Houston, TX
  >

I have put you on the list, Allen.

I guess I will have to talk to the machinist about flexible tooling, and
fixtures. NC programs will have to be modified too.

Doc Custer
Retired Software Engineer and sometime Audiologist


I am also interested in a slide throttle for a 20b as an IO-540
replacement
Norm Farb
Independence, OR


Add me to the 20B list, too.
And I vote for red anodizing.

Ben Baltrusaitis

[Acroduster Too]


Doc,
I may have missed someone's reply to your question, but NO, the spacing
on the third rotor isn't the same.  I think it is 2", but I'll have to
measure and check.  There's a third main bearing in that side housing.

Thanks,
Mark

Mark my 20B is in the hangar. Can you measure the width of
the housing for me. I think I have it somewhere but a double
check won't hurt.

Paul Lamar ...No rotor no motor.

I have added Ben and Norm to the 20B slide throttle list.

Glad I asked about the spacing. As soon as I find out I will talk to the
machinist about making some 20B throttles.

So far I have 5 expressions of interest for the 13B slide throttle.
I have 4 expressions of interest for the 20B slide throttle.
Rick Irwin said he voted for blue, but didn't specify either 13B or 20B.
Which is it Rick?

Doc Custer
Retired Software Engineer and sometime Audiologist



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.