Hello Paul,

I'm searching for a RV-4 renesis engine mount.

Jerry told me you would do the engineering and he would do the welding.

As I remember you will need the firewall hardpoint plan sets
which I don`t have because I decided to start firewall forward
for different reasons.

I remember seeing some pics of a RV-4 mount on your homepage,
so I hope you already got the needed plans?

best regards
Thomas

Sure no problem. I need a few dimensions. The firewall out line
and the lenght of the cowl. Also do you plane to use the stock
checked cowl or build you own? I think I know where you
can get a real slick rotary engine cowl from Brian Trubee.
Brian might also give us the hard point dimensions. I might
have them as well.

-- 
Paul Lamar ...No rotor no motor.

Cool!

I don`t want to use the stock cowling.
Something like Mike Wills or Brian Trubee, if possilbe with a ram air scoop. But thats far away in the future yet.

Is Brain still onboard?

Kind regards
Thomas


Yes he is. He moved the cooling rad down under the cockpit somewhat
like the quick and simple cooling system. Frees up a lot of volume
under the cowl. Does away with the scoop under the prop. Makes
the cowl easier to build. The last shots are of Steve Rosine
airplane.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.