I have been monitoring this group for three months now and look forward to
each day's postings.  I am an active pilot (P210) and a long-time subscriber
to Kitplanes, so your discussions surrounding the perfection of the rotary
aviation engine really intrigue me.  A 337 running two rotaries would be one
heck of an airplane!

I apologize to the aviation purists that my posting is not aviation related,
but it is rotary related.  I own a small manufacturing company in North
Central Montana which has twenty years experience building portable natural
gas compressors.  Our units feature rotary screw compressors driven by
piston engines (natural gas powered).

I would like to investigate the possibility of utilizing the rotary engine
as a "valve-less" compressor.  I am hoping that through this group I can
find individuals who would be willing to provide engineering services for
this concept.

Ideally, I would like to see the driver and the compressor integrated into
the same rotary engine block--one rotor driving another.

My major concern is that the stock rotary has too much inherent overlap
between the intake and discharge ports to work properly as a compressor
without the installation of intake and discharge valves.  Is there a way to
re-configure the ports to eliminate overlap?

Cole T. Chandler

Sure you put the output p-port just about where the spark plugs
are.

Wankel rotaries have been widely used as compressors.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.