Paul,  you say to extend this piece .75 to fit the Renesis pan
flange.  Question,  does the .75" dia hole remain in place or move
outboard.  I am guessing it moves but need to be sure.   Thanks, Jerry

I just filled in the upper right hand corner and put another
1/4 inch hole there. I did not extend the width. No need.
No other dimensions are changed.

BTW with a little band width left over here are some
pics of the RX8 engine oil pan.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.