Anybody selling RX8 exhaust manifold gaskets for less than $65.00?  Also do I
need a foam plate on top of my six quart oil pan? Karibian


Probably not on the plate. Got any pictures of the oil pan welded?
--
Paul Lamar ...No rotor no motor.


I gave up on the original steel oil pan when I made the aluminum one
(attachment) I can make and finish another one if you think it  would help
the cause.

While I have your ear, does anybody have an idea on how large a  hole is
needed for six nozzles (one in each intake on the Renesis engine)in  the low
pressure dribble system and is this going to require a barrel valve?
Karibian


That is a really nice oil pan Hurant. Did you weld it?

Check with Kinsler: http://www.kinsler.com/


Paul Lamar ...No rotor no motor.

That is a nice pan. I like the idea of cutting the flange so that the
pan just drops in.  I had not thought of doing it that way.   The
rolled ends on the bottom is a nice touch, too.   Is the flange/pan
weld on the inside?    Jerry


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.