Hi Paul;
Here are a few pages of another Mazda tech paper on Pports.
I can scan the rest or shrink it further.
Cheers
Cary
GREAT paper find Cary. WONDERFUL!!! THANKS A BUNCH.
Scan a few PAGES at a time with the same rez if you don't mind
as when I use gimp to scale them down the quality seems to improves.
Thanks again Cary this is a breakthrough for us on
P-port research.
Hi Paul;
This paper appears to be a lead-up to the Lemans 1991 cars.
I scanned them in at 300dpi, no correction, stored as jpeg with max
compression.
The limit appears to be the quality of the photocopy.
This makes me want to dig a bit more into the Mazda SAE papers...
Enjoy!
Cary
This first one did not quite make it.
Paul Lamar
Sorry bout the confusion;
There were a total of 12 pages. I numbered them i(cover page), ii(SAE
filler), and 1-10.
The meat was in page 6-9 that I sent in the first email.
Cary
Can you redo the title page? The right side was cut off.
> Paul Lamar
The title page looks just like the photocopy (actually better, go figure).
I don't recall seeing a difference or anything chopped off the right
side of the title page.
The only difference I can recall is a covered up library stamp in the
bottom right
above "International Congress and Exposition".
I can check the library copy again - is there something else specific
you are looking for?
Cheers
Cary
OK no problem Cary. I now see what is going on.
Thanks for doing this. IMHO this is somewhat of a smoke screen
as a year later Mazda used something significantly different
on the Lemans engine :) It is interesting they were working
on a computer simulation of the p-port intake system that far back.
The RX8 high power engine intake is enormously complicated
so they obviously were looking for a tool.
BTW have you dynoed your engine yet. If you can get it down
to Socal. I'll sponsor a few runs on the Mazdatrix dyno.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.