Subject: Exhaust Welding Bulent pusher.
From: Rotary Engine
Date: 2/1/2007, 6:07 PM
To: AARotary Engine



     > What are your performance numbers Bulent.
     > Static RPM? MAP? GPH?
     > Climb speed? RPM? MAP? GPH?
     > Cruise speed? RPM? MAP? GPH?
     > Top speed? RPM? MAP? GPH?
     > Prop number of blades diameter?
     >
     > Paul Lamar

    Paul, today was only my second flight by myself in the plane.  As you
    know i converted my TA to NA and also converted the prop to 2  blade.
    On takeoff I get 6500 - 7000 rpm on 2.17 PSRU and fine pitch.  Flown
    it only at up-to 140-150 knots. On the EM2 there are rows of  numbers
    that change all the time, and there is no way to fly in a very  busy
    controlled airspace, look for other aircraft, talk to ATC, change
    frequencies, transponder codes and remember all the numbers. I'm
    thinking of installing a video camera to record all that?
    My prop is IVO Magnum inflight adjustable 68" diameter 2 blade. I
    have 3rd blade in case I want to go back to 3.
    Bulent


    Hi Buly,
      The data logger for the EM2 is now in production.  Will add  it to
    website in a week or two when first batch is ready to ship.

    Tracy

I was waiting for this one. Hope it is cheaper than a video camera :)
Buly

Bulent "Buly" Aliev
FXE Ft lauderdale, FL
 http://tinyurl.com/dcy36

Use your cell phone camera Buly :)

Most digital cameras have movie clip capability now a days.

-- 
Paul Lamar ...No rotor no motor.


It's hard to climb back inside of the firewall to get that photo
though... While in flight...

Rick Irwin

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.