This is probably the cheapest dyno to make and the most useful.
Not only will it measure your actual HP in the air on a
continuous basis but it will help greatly when optimizing
your propeller. It works the same way as a torque meter on
a PT6 turbo prop engine. It measures the un screwing force on
the Ford helical gear set. It works best with a pressure
sensor and a digital read out but a 360 degree mechanical
pressure gage will also work. It is based on an invention
of mine 35 years ago that is now widely used through out
the world as a manual transmission clutch throw out system.
You are probably driving a car that has one in it. Consequently
The annular hydraulic cylinder could be scavenged from a junkyard.
Look for GM cars with V8's. Ideal if your building your own
PSRU.
---------------------------------------------
Here is a annular hydraulic cylinder product from Tilton
Engineering which 35 years ago was known as Lamar Engineering.
I sold the biz and they later changed the name.
http://www.tiltonracing.com/content.php?page=list2&id=256&m=d
You can also get the Howe product from Summit Racing.
http://www.summitracing.com/
http://www.howeracing.com/DriveTrain/Index-Throw-HydRacing.htm
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.