Rhino Ver3 is interfaced directly with VisualMill for 2 and 2 1/2 D CAM
work also VisualMill Pro for 3D work.

I produce both full sized airfoil drawings and parts for aircraft as
well as moulds for fiberglass.

Suggest RAMS, BobCad, Sheet CAM, all of which accept DXF as output by
most CAD programs.

Manual programming for the throttle plate is not that hard nor time
consuming, I have done this already to check run time and accuracy.  G
Code requirements will vary depending on specific machine controller
systems.

Regards,
R J Skinner
BearWorks CNC



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.