Can a RX-8 oil inj. port be used as a fuel inj. port?
milo
Interesting idea. Perhaps it will work. Four FI ports
so it has the redundancy required.
Paul Lamar
You might not get a good stoichiometric spray pattern. It isn't enough
to get the right fuel/air ratio, you have to distribute it properly
inside the chamber.
Keith
Keith has a good point here.
After thinking about it some more the big problem
is the angle of the RX8 oil injector ports would
be a big problem. They would inject the fuel directly
at the end housings walls. Not what you want.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.