Subject: Source for minerature regulator? Cheap EFI?
From: Rotary Engine
Date: 2/11/2007, 7:28 PM
To: AARotary Engine



<<snip>
-----------------------------------------------------

Here is a company that embeds the BASIC interpreter into
the PIC. These are so cheap and so easy to use everybody on
here should buy one of these things and play with it.
Your knowledge  on EFI computer systems will immediately jump to a
higher plateau. Tons of Internet support.

  http://www.rev-ed.co.uk/picaxe/
http://www.picaxe.org/
http://www.phanderson.com/picaxe/picaxe.html
http://www.hippy.freeserve.co.uk/picaxeqa.htm
http://dave.fraildream.net/picaxe/index.shtml

Attached is the 73 page clearly written manual. It includes a
tutorial on the version of BASIC used to program the chips.

Interestingly you can use a graphical method of programming
which is very easy to learn. It basically is a visual
representation of your program in flow chart form. You arrange
the building blocks on the computer screen and and it writes the
program for you. A lot like what you did in kindergarten :)

--------------------------------------------------------

Here a program that controls a DC motor. It is the heart
and soul of the simple constant dribble EFI system. This is
it! There is little more.
http://www.phanderson.com/picaxe/pwm.html

BTW no returning hot fuel to the fuel tanks.

-----------------------------------------------------

I went on the PICAXE web site and downloaded the 27 meg free
programming editor. http://www.rev-ed.co.uk/picaxe/

This is the greatest thing since sliced bread
when it comes to programming. I wrote my first program in 30 seconds
using the Kindergarten blocks.

Not only that but they have included a free simulator.
My 3 line program program blinks a green light. The simulator
is animated and it steps through your program over and over
again while the green light on the screen blinks on and off.
Here is a screen capture from my Windoze computer.
It also gives you BASIC and assembler source listings.

All I can say is WOW!  This is way beyond clay and everybody
can become Leonardo da Vinci of programming.

I wish I had something like this when I wrote my first year long
6502 assembler program for the first $5000 Lamar Instruments Real
Time Road Test System that then Managing Editor John Dinkel on
here bought for Road & Track magazine way back in 1975.
That got me a super head start in computers. Thanks again John
for your trust and belief in me. Which eventually allowed me to
do the last picture :) (Not Robin :)) I forgot her name :)

BTW NO expensive solenoid fuel injectors to plug up or fail.
No fuel injector bungs welded to intake tubes. No fuel rails.
No pressure regulators. No fuel return lines to the fuel tanks.

The EFI constant dribble fuel hardware system under the cowl
consist of only two -4 AN fuel hoses. One for each rotor.
That's it!!!!! It feeds fuel to the engine only in the amount
it needs for the prop load at the moment.

We are looking at nothing short of a revolution in low
cost EFI systems for aircraft engines here IMHO.

Paul Lamar ...No rotor no motor.

I agree with you.

Is there a US distributor? I would like to buy a PICAXE system without the
delay of transatlantic delivery.

The BASIC language is a great one for teaching. The PICAXE system should be
an ideal learning environment. In my case I wish to learn the hardware side
of the equation.

A word of caution however. BASIC tends to be slow. The PICAXE system has
only a polled interrupt; this has lots of performance implications. A polled
interrupt (purists would argue that it is not a hardware interrupt at all)
places a high overhead on the system. The result is that one PICAXE might
not be able to handle the real time requirements. Then again it might. AND a
complete system could incorporate more than one to share the load. Caveat
emptor!

Will work up a draft system diagram for your consideration. Hardware must
come before software.

Doc Custer
Retired Software Engineer and sometime Audiologist



That was true in the old days but these things average 10,000
BASIC instructions per second as I recall.
That's at 4 megahertz. One ass. instruction per microsecond
or one million ass. instructions per second.
Some of the 28 pin and 40 pin PICAXE chips will clock
at 16 megahertz or 40,000 BASIC instructions per second.
This is a compiler and not a interpreter. I was wrong
about it being an interpreter.

You might have to do a bit of assemble languages to use the
hardware interrupt. Try the polling interrupt first.
The simple version don't have a lot to do so it can spend
most of the time polling.

Try www.world-education-services.com
email  masc1@usa.net
www.panderson.com

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.