Subject: Source for miniature regulator? Cheap EFI?
From: Rotary Engine
Date: 2/13/2007, 6:32 AM
To: AARotary Engine





<<snip>

-----------------------------------------------------

Here is a company that embeds the BASIC
interpreter into
the PIC. These are so cheap and so easy to use
everybody on
here should buy one of these things and play with
it.
Your knowledge  on EFI computer systems will
immediately jump to a
higher plateau. Tons of Internet support.

http://www.rev-ed.co.uk/picaxe/
http://www.picaxe.org/
http://www.phanderson.com/picaxe/picaxe.html
http://www.hippy.freeserve.co.uk/picaxeqa.htm
http://dave.fraildream.net/picaxe/index.shtml

Attached is the 73 page clearly written manual. It
includes a
tutorial on the version of BASIC used to program
the chips.

Interestingly you can use a graphical method of
programming
which is very easy to learn. It basically is a
visual
representation of your program in flow chart form.
You arrange
the building blocks on the computer screen and and
it writes the
program for you. A lot like what you did in
kindergarten :)



--------------------------------------------------------

Here a program that controls a DC motor. It is the
heart
and soul of the simple constant dribble EFI
system. This is
it! There is little more.
http://www.phanderson.com/picaxe/pwm.html

BTW no returning hot fuel to the fuel tanks.



-----------------------------------------------------

I went on the PICAXE web site and downloaded the
27 meg free
programming editor.
http://www.rev-ed.co.uk/picaxe/

This is the greatest thing since sliced bread
when it comes to programming. I wrote my first
program in 30 seconds
using the Kindergarten blocks.

Not only that but they have included a free
simulator.
My 3 line program program blinks a green light.
The simulator
is animated and it steps through your program over
and over
again while the green light on the screen blinks
on and off.
Here is a screen capture from my Windoze computer.
It also gives you BASIC and assembler source
listings.

All I can say is WOW!  This is way beyond clay and
everybody
can become Leonardo da Vinci of programming.

I wish I had something like this when I wrote my
first year long
6502 assembler program for the first $5000 Lamar
Instruments Real
Time Road Test System that then Managing Editor
John Dinkel on
here bought for Road & Track magazine way back in
1975.
That got me a super head start in computers.
Thanks again John
for your trust and belief in me. Which eventually
allowed me to
do the last picture :) (Not Robin :)) I forgot her
name :)

BTW NO expensive solenoid fuel injectors to plug
up or fail.
No fuel injector bungs welded to intake tubes. No
fuel rails.
No pressure regulators. No fuel return lines to
the fuel tanks.

The EFI constant dribble fuel hardware system
under the cowl
consist of only two -4 AN fuel hoses. One for each
rotor.
That's it!!!!! It feeds fuel to the engine only in
the amount
it needs for the prop load at the moment.

We are looking at nothing short of a revolution in
low
cost EFI systems for aircraft engines here IMHO.

Paul Lamar ...No rotor no motor.

I agree with you.

Is there a US distributor? I would like to buy a
PICAXE system without the
delay of transatlantic delivery.

The BASIC language is a great one for teaching. The
PICAXE system should be
an ideal learning environment. In my case I wish to
learn the hardware side
of the equation.

A word of caution however. BASIC tends to be slow.
The PICAXE system has
only a polled interrupt; this has lots of
performance implications. A polled
interrupt (purists would argue that it is not a
hardware interrupt at all)
places a high overhead on the system. The result is
that one PICAXE might
not be able to handle the real time requirements.
Then again it might. AND a
complete system could incorporate more than one to
share the load. Caveat
emptor!

Will work up a draft system diagram for your
consideration. Hardware must
come before software.

Doc Custer
Retired Software Engineer and sometime Audiologist



That was true in the old days but these things
average 10,000
BASIC instructions per second as I recall.
That's at 4 megahertz. One ass. instruction per
microsecond
or one million ass. instructions per second.
Some of the 28 pin and 40 pin PICAXE chips will
clock
at 16 megahertz or 40,000 BASIC instructions per
second.
This is a compiler and not a interpreter. I was
wrong
about it being an interpreter.

You might have to do a bit of assemble languages to
use the
hardware interrupt. Try the polling interrupt first.
The simple version don't have a lot to do so it can
spend
most of the time polling.

Try www.world-education-services.com
email  masc1@usa.net
www.panderson.com

Paul Lamar ...No rotor no motor.

Paul,

I highly recommend buying PicAxe products from Peter
Anderson.  His prices and support are great, and
shipping costs are low.  FYI, the link above is
missing the 'h'.  Proper link below:

http://www.phanderson.com/

I've used the PicAxe on a few projects myself.  It's
an amazing micro for those who want to get up and
running quickly.  It's an unbeatable value, certainly
taking a bite out of Parallax's BasicStamp market.

I'm watching with interest your cheap efi ideas.
There are some similarities to the Ellison TBI.
Proper fuel filtration will be very important.  Those
tiny fuel distribution holes could easily get plugged
by contaminants.

Roger Enns.


Yep. One advantage of the low pressure system. Bigger holes.

------------------------------------------------------
Looks like the PIXAXE comes with free glass cockpit software.
If you connect a small laptop computer that will run the
PIXAXE software a command is built in called "debug" that
will display on the computer screen up to a dozen engine
parameters. OBD II for your aircraft engine :)

Is that cool or what?

---------------------------------------------

Oh-my-God it gets better than that.

"..................GPH equals  xxx" .
"..................RPM equals  rrr"
"Fuel pump pulse width equals ppp"
"......Intake air temp equals ttt"
"..................MAP equals mmm"
etc., etc., etc..

Up to a dozen or so is displayed on the lap top screen.

No extra cost.  All FREE!!!  DOUBLE WOW WOW!!!!!!!!!

THIS IS AMAZING!  I AM STUNNED!

--------------------------------------------

OK here is a 10 inch wide screen Fujitsu tablet computer you
can mount on the instrument panel for your PIXAXE glass
cockpit. The keyboard can be hidden behind the screen on tablet
computers.  Go to Fry's and buy GPS moving road map software
which includes a GPS PC card receiver for another $150.


Paul Lamar ...No rotor no motor.


Paul

If I understand these products correctly they should be able to perform as
dyno unit as well. Record of course, but with one of your machine language
interfaces perhaps 'play' as well.  The throttle and dyno load would need to
be controlled by servo motors.

Program the engine dyno run we want to test.

This is what the Land and Sea dyno software does on a PC but the record only
version  starts at $998 and goes up to about $3000 for the Pro 'play'
version.

Doug

No that is not what this is about. This is about a super simple and super
cheap EFI system.

However if you install the annular
hydraulic cylinder around the PSRU input shaft and connected it to a pressure
sensor this PICAXE microcomputer can read out the HP while you are flying.
The load would be your prop. The PICXAXE can send the data in real time
to a small notebook computer mounted on the instrument panel. Maybe stored
on the hard disk.

I was able to connect my computer to the Internet at my publishers so the
news letter will be up off and on for the next week.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.