--
> >> <<snip>
> >>
> > -----------------------------------------------------
> >>>
> >>> Here is a company that embeds the BASIC
> >> interpreter into
> >>> the PIC. These are so cheap and so easy to use
> >> everybody on
> >>> here should buy one of these things and play with
> >> it.
> >>> Your knowledge on EFI computer systems will
> >> immediately jump to a
> >>> higher plateau. Tons of Internet support.
> >>>
> >>>
http://www.rev-ed.co.uk/picaxe/
> >>>
http://www.picaxe.org/
> >>>
http://www.phanderson.com/picaxe/picaxe.html
> >>>
http://www.hippy.freeserve.co.uk/picaxeqa.htm
> >>>
http://dave.fraildream.net/picaxe/index.shtml
> >>>
> >>> Attached is the 73 page clearly written manual. It
> >> includes a
> >>> tutorial on the version of BASIC used to program
> >> the chips.
> >>>
> >>> Interestingly you can use a graphical method of
> >> programming
> >>> which is very easy to learn. It basically is a
> >> visual
> >>> representation of your program in flow chart form.
> >> You arrange
> >>> the building blocks on the computer screen and and
> >> it writes the
> >>> program for you. A lot like what you did in
> >> kindergarten :)
> >>>
> >>>
> >>
> > --------------------------------------------------------
> >>>
> >>> Here a program that controls a DC motor. It is the
> >> heart
> >>> and soul of the simple constant dribble EFI
> >> system. This is
> >>> it! There is little more.
> >>>
http://www.phanderson.com/picaxe/pwm.html
> >>>
> >>> BTW no returning hot fuel to the fuel tanks.
> >>>
> >>>
> >>
> > -----------------------------------------------------
> >>>
> >>> I went on the PICAXE web site and downloaded the
> >> 27 meg free
> >>> programming editor.
> >>
http://www.rev-ed.co.uk/picaxe/
> >>>
> >>> This is the greatest thing since sliced bread
> >>> when it comes to programming. I wrote my first
> >> program in 30 seconds
> >>> using the Kindergarten blocks.
> >>>
> >>> Not only that but they have included a free
> >> simulator.
> >>> My 3 line program program blinks a green light.
> >> The simulator
> >>> is animated and it steps through your program over
> >> and over
> >>> again while the green light on the screen blinks
> >> on and off.
> >>> Here is a screen capture from my Windoze computer.
> >>> It also gives you BASIC and assembler source
> >> listings.
> >>>
> >>> All I can say is WOW! This is way beyond clay and
> >> everybody
> >>> can become Leonardo da Vinci of programming.
> >>>
> >>> I wish I had something like this when I wrote my
> >> first year long
> >>> 6502 assembler program for the first $5000 Lamar
> >> Instruments Real
> >>> Time Road Test System that then Managing Editor
> >> John Dinkel on
> >>> here bought for Road & Track magazine way back in
> >> 1975.
> >>> That got me a super head start in computers.
> >> Thanks again John
> >>> for your trust and belief in me. Which eventually
> >> allowed me to
> >>> do the last picture :) (Not Robin :)) I forgot her
> >> name :)
> >>>
> >>> BTW NO expensive solenoid fuel injectors to plug
> >> up or fail.
> >>> No fuel injector bungs welded to intake tubes. No
> >> fuel rails.
> >>> No pressure regulators. No fuel return lines to
> >> the fuel tanks.
> >>>
> >>> The EFI constant dribble fuel hardware system
> >> under the cowl
> >>> consist of only two -4 AN fuel hoses. One for each
> >> rotor.
> >>> That's it!!!!! It feeds fuel to the engine only in
> >> the amount
> >>> it needs for the prop load at the moment.
> >>>
> >>> We are looking at nothing short of a revolution in
> >> low
> >>> cost EFI systems for aircraft engines here IMHO.
> >>>
> >>> Paul Lamar ...No rotor no motor.
> >>
> >> I agree with you.
> >>
> >> Is there a US distributor? I would like to buy a
> >> PICAXE system without the
> >> delay of transatlantic delivery.
> >>
> >> The BASIC language is a great one for teaching. The
> >> PICAXE system should be
> >> an ideal learning environment. In my case I wish to
> >> learn the hardware side
> >> of the equation.
> >>
> >> A word of caution however. BASIC tends to be slow.
> >> The PICAXE system has
> >> only a polled interrupt; this has lots of
> >> performance implications. A polled
> >> interrupt (purists would argue that it is not a
> >> hardware interrupt at all)
> >> places a high overhead on the system. The result is
> >> that one PICAXE might
> >> not be able to handle the real time requirements.
> >> Then again it might. AND a
> >> complete system could incorporate more than one to
> >> share the load. Caveat
> >> emptor!
> >>
> >> Will work up a draft system diagram for your
> >> consideration. Hardware must
> >> come before software.
> >>
> >> Doc Custer
> >> Retired Software Engineer and sometime Audiologist
> >>
> >>
> >>
> >> That was true in the old days but these things
> >> average 10,000
> >> BASIC instructions per second as I recall.
> >> That's at 4 megahertz. One ass. instruction per
> >> microsecond
> >> or one million ass. instructions per second.
> >> Some of the 28 pin and 40 pin PICAXE chips will
> >> clock
> >> at 16 megahertz or 40,000 BASIC instructions per
> >> second.
> >> This is a compiler and not a interpreter. I was
> >> wrong
> >> about it being an interpreter.
> >>
> >> You might have to do a bit of assemble languages to
> >> use the
> >> hardware interrupt. Try the polling interrupt first.
> >> The simple version don't have a lot to do so it can
> >> spend
> >> most of the time polling.
> >>
> >> Try
www.world-education-services.com
<http://www.world-education-services.com>
> >> email
masc1@usa.net <mailto:masc1@usa.net>
> >>
www.panderson.com <http://www.panderson.com>
> >>
> >> Paul Lamar ...No rotor no motor.
> >
> > Paul,
> >
> > I highly recommend buying PicAxe products from Peter
> > Anderson. His prices and support are great, and
> > shipping costs are low. FYI, the link above is
> > missing the 'h'. Proper link below:
> >
> >
http://www.phanderson.com/
> >
> > I've used the PicAxe on a few projects myself. It's
> > an amazing micro for those who want to get up and
> > running quickly. It's an unbeatable value, certainly
> > taking a bite out of Parallax's BasicStamp market.
> >
> > I'm watching with interest your cheap efi ideas.
> > There are some similarities to the Ellison TBI.
> > Proper fuel filtration will be very important. Those
> > tiny fuel distribution holes could easily get plugged
> > by contaminants.
> >
> > Roger Enns.
> >
> >
> > Yep. One advantage of the low pressure system. Bigger holes.
> >
> > ------------------------------------------------------
> > Looks like the PIXAXE comes with free glass cockpit software.
> > If you connect a small laptop computer that will run the
> > PIXAXE software a command is built in called "debug" that
> > will display on the computer screen up to a dozen engine
> > parameters. OBD II for your aircraft engine :)
> >
> > Is that cool or what?
> >
> > ---------------------------------------------
> >
> > Oh-my-God it gets better than that.
> >
> > "..................GPH equals xxx" .
> > "..................RPM equals rrr"
> > "Fuel pump pulse width equals ppp"
> > "......Intake air temp equals ttt"
> > "..................MAP equals mmm"
> > etc., etc., etc..
> >
> > Up to a dozen or so is displayed on the lap top screen.
> >
> > No extra cost. All FREE!!! DOUBLE WOW WOW!!!!!!!!!
> >
> > THIS IS AMAZING! I AM STUNNED!
> >
> > --------------------------------------------
> >
> > OK here is a 10 inch wide screen Fujitsu tablet computer you
> > can mount on the instrument panel for your PIXAXE glass
> > cockpit. The keyboard can be hidden behind the screen on tablet
> > computers. Go to Fry's and buy GPS moving road map software
> > which includes a GPS PC card receiver for another $150.
> >
> >
> > Paul Lamar ...No rotor no motor.
> >
>
> Paul
>
> If I understand these products correctly they should be able to
perform as
> dyno unit as well. Record of course, but with one of your machine
language
> interfaces perhaps 'play' as well. The throttle and dyno load would
need to
> be controlled by servo motors.
>
> Program the engine dyno run we want to test.
>
> This is what the Land and Sea dyno software does on a PC but the
record only
> version starts at $998 and goes up to about $3000 for the Pro 'play'
> version.
>
> Doug
>
> No that is not what this is about. This is about a super simple and super
> cheap EFI system.
>
> However if you install the annular
> hydraulic cylinder around the PSRU input shaft and connected it to a
pressure
> sensor this PICAXE microcomputer can read out the HP while you are
flying.
> The load would be your prop. The PICXAXE can send the data in real time
> to a small notebook computer mounted on the instrument panel. Maybe
stored
> on the hard disk.
>
> I was able to connect my computer to the Internet at my publishers so the
> news letter will be up off and on for the next week.
> --
> Paul Lamar ...No rotor no motor.
Paul,
A day without the newsletter is like a day without sunshine. ;0)
Thanks
_again_ Paul, for the opportunity to enrich myself (and others
too) until bursting with all things aviation related.
You'll appreciate knowing that being in Florida, shows very good
judgement on your part, as we landlubbers, here in central IL, are in
the throes of a blizzard.
The abrupt halt of the newsletter seemed to be of an ominous nature, at
first read. Glad to here it wasn't something like that.
STOL CH 801
Someday... my gestating aluminum soulmate N801YZ and I, will pay Florida
a long visit during the whiteout season.
Perry,
IL
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.