> Here are some shots of Tracy 20B 3 rotor engine in his RV8.
     > Close to flying. He is waiting for his Blue Mountain glass
     > cockpit. The roughly 12 inches long intake tubes are in the
     > large wooden plenum. The throttle body is an RX8 fly by wire!
     > IMHO scary :) He is using RX8 coils. He said the hot tip
     > for the GM V8 coils is the truck versions. I don't have a part
     > number yet. Those are the ones that have heat sinks.
     >
     > Paul Lamar ...No rotor no motor.


    Hi Tracy,

    where did you get the connectors for the RX8 coils? I recently got a
    set of
    coils for the single rotor from Metromotorparts, a real bargain at
    $27.00 a
    piece. Also got the crans angle sensor, the same problem.

    The single rotor is going on the test stand for running the compound
    side
    housing.

    Thanks.

    Richard Sohn
    8029 HWY 1087
    DeFuniak Springs, FL 32433


    He is out of town for a few days Richard and he does not always
    read his email from here. Call him or send email.

    Paul Lamar

Laura Crook wrote:

Hi Paul   - The coils Tracy recommends are NOT THE TRUCK VERSION. They
are the CORVETTE version.

Laura

Thanks Laura.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.