Subject: EFI block I/O diagram
From: Rotary Engine
Date: 2/18/2007, 7:41 PM
To: AARotary Engine


I have not played with an O2 sensor but have read a fair amount about
them.  The narrow band flavor have a sharp change in voltage when
transitioning through stoichiometric mixture.  I think something like
this one would work properly:

http://store.summitracing.com/partdetail.asp?autofilter=1&part=CTO% 2DO2%2D13&N=700+115&autoview=sku
<http://store.summitracing.com/partdetail.asp?autofilter=1&part=CTO %2DO2%2D13&N=700+115&autoview=sku>

That's summit racing http://www.summitracing.com part number CTO- O2-13 $25.

The input circuit will need to be fairly high impedance, to an A/D
probably would be best.  Or a simple comparator would work pretty  well too.


Matt-


I ordered:  SM-AFR & DM-5 Combo from www.plxdevices.com.
Buly



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.