Assuming you have an Ethernet port on that Redhat machine,
I'd borrow (from me) either a Linksys Wet11 or CB3 Ethernet
bridge.  You could dig around the net looking for RH support
for other options, and probably find several, but that's the
quickest and easiest solution I can come up with.

Bob

Yes I do.
Thanks Bob. How much do those things cost?

Paul Lamar ...No rotor no motor.

How much do those things cost?

About $100, give or take.  But I have a box full of crap like that,
and you're welcome to borrow one for as long as you need it.
There's a slim chance that I'll be at SnF, but the safer bet is to just
mail it to you, that way we can pre-config it before the show.
Not that there's much configuration, they're pretty simple, but we
want to make sure it's up and running before you're standing in
front of a crowd trying to set up for a presentation.

Send me your shipping address and I'll get one out.

Bob

OK will do thanks Bob.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.