Hi Doc. This is a 3D of the return plumbing
required you mentioned awhile back with the pressure
regulator and the all mechanical constant dribble system.
The PICAXE EFI system on the other hand eliminates the need for
this return plumbing as the pump is positive displacement and the
motor speed is controlled by the PICAXE PWM to provide only the
exact amount of fuel required.
Mallory, Holley and Aeromotive have both gerotor and vane type
constant displacement pumps that will work.
summitracing.com
The vane pumps are quite a bit cheaper. The gerotor types are probably
more reliable. I had a vane boost pump fail in a Mooney causing an
emergency landing.
The Holley gerotor model HLY-12-125 has a built in fuel pressure
regulator.
Here is a 3D of the PICAXE plumbing. Only two pos. disp. fuel pumps are
shown. One for each rotor. Two PICAXE systems are required to
control the individual pumps and match the EGTs on both rotors.
Two complete systems per rotor could be used for further redundancy
and back up.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.