Subject: Source for minerature regulator? Cheap EFI?
From: Rotary Engine
Date: 2/20/2007, 5:05 PM
To: AARotary Engine

        Paul,

        I missed the post that started all of this. Could you resend it
   to me?
        I'm looking to understand the mechanical layout of this EFI and the
        theory behind it.

        Thanks
        Ken Bauman




         > Is it possible to reverse the direction the slide throttle
   travels
         > with the use of a bell crank?  Jerry


        Jerry,
        If you reverse the slide throttle you can make the housing 2"
   shorter.
        IMHO It is much better to provide attachment of the throttle cable
        directly to the slide throttle compared to building some extra
   bracket.
        As you push the throttle control forward the throttle plate
        actually moves forward opening the intake.
        Take a look at the AeroCarb to get the picture.
        http://www.aeroconversions.com/carb_index.html
        I have one of these on one of my planes and it works great.
        They even make a ninety degree bellcrank for some installations
        which also is to be mounted directly to the throttle body.  I
        modified the bellcarnk to allow 85mm (3 3/8") of throttle cable
        travel for the 29mm of throttle plate travel.       jm2c

        Terry Adams


        This is a VERY simple system. No computer, no sensors, no
        floats, no venturi, no fuel injectors, no nothing. Just very
        low pressure fuel. The fuel orifice area simply increases with
        the air passage area increase. Bigger fuel hole bigger air hole.
        There is another simple series valve that controls leaning.

        I think I have figured out how to do this with our slide
        throttle. No fuel injectors required. In fact other than
        a bit of plumbing there are no additional parts.
        Patent applied for :)


        Paul Lamar



              This is a VERY simple system. No computer, no sensors, no
              floats, no venturi, no fuel injectors, no nothing. Just very
              low pressure fuel. The fuel orifice area simply increases
   with
              the air passage area increase. Bigger fuel hole bigger
   air hole.
              There is another simple series valve that controls leaning.
              Paul Lamar

        snips ................

        Times up.
        Here it is. Super simple. A series of progressively larger
        feed holes in the Teflon slide communicating a with a fixed
        larger fuel hole in the aluminum spacer.

        Patent applied for :)
        --
        Paul Lamar ...No rotor no motor.





   This is part of what I needed. I went back and read all the posts I had
   skipped due to the "cheap regulator" heading. I'll pay more attention.

   Months ago I mentioned using two high pressure pumps (PWM) and some CIS
   injectors as a simple EFI. Using a low pressure pump in a dribble system
   seems that the fuel would not have good delivery or atomization. Airflow
   Performance has some nice mechanical injectors that work at around 5lbs
   psi.

   High pressure fuel resists vapor lock better.

   If you monitor the pressure differential across the injector you can
   compensate for pump wear, battery voltage etc.

   Ken Bauman

   Could be your post was in my subconsciouses mind Ken.
   Do you recall about what month and year? I'll search back for
   it.

   Paul Lamar

12/6/06 therabouts.

I'm not even sure it I didn't hear it somewhere before. I've kicked it
out a number of times on different lists. I like the idea of it being in
the public domain. Garfield once chewed my ass about stuff needing to be
patented to protect aviation from corporate greed.

Hope to see any variation run. I've been gathering components to play
with a CIS version. I have the injectors, pump and a PWM for manual
control of the pump. I plan to just turn up the pressure as I increase
RPM to see if I can do it. If that worked then go from there.

Doc's sounds better.

Ken Bauman

Didn't Garfield die?
A patent is not worth the paper it is printed on unless
you have millions to fight corporations that steal it.
Been there done that.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.