Subject: Cute little 3rd gen fuel pump
From: Rotary Engine
Date: 2/22/2007, 7:37 AM
To: AARotary Engine


This cute little thing is good for 280 HP in
the 3rd gen turbo RX7.

Could use four mounted in the fuel tanks.
Two in each tank. One primary and one back up
in each tank. Four switches on the instrument panel.
Right tank primary or back up. Left tank primary
or back up. No fuel selector valve needed.

If you took them out of the tank and fed them with
a manifold and tank selector valve you would have
a lot more options such as one pump for each rotor
primary and back up.

I'll run some linearity test on these as soon
as I get my PICAXE.
-- 
Paul Lamar ...No rotor no motor.

Nice! Is this a stock Mazda part? If so, do you have the part
number handy?
Our local Mazda dealer parts  dept. needs all the help it
can get.

Doc Custer
Retired Software Engineer and sometime Audiologist

Yes stock third gen. You ask some hard questions Doc :)
Best for you to download the parts manuals.

http://www.wankel.net/~krwright/cars/rx7/manuals.html

Also good for you to do biz with Bob Mears as he was kind
enough to give us a discount being a both a Mazda dealer
and a builder himself.

"Call Ronnie Kenley, [his] parts manager, let him know your
part of the rotary aircraft group. 800 692 4497"

BTW Bob your 3 rotor rotary powered Spitfire is going to be
fantastic PR for your company and you may show the way to
Mazda. Way to go.


Paul Lamar ...No rotor no motor.

Thanks, Paul.

I will be calling Bob's shop in the near future. Always want to help someone
in the movement.

Doc Custer
Retired Software Engineer and sometime Audiologist



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.