hi all, i have a 12a single rotor engine home built by an old man
in texas, he is gone west now. he built a 6 pinion planetary gear box
all steel to go on it. has a 3 blade carbon fiber prop, ground
adjustable, to go with it, no name.. i bought it to get a little more
practical experience with singles. it is too heavy for my airframes so
i have decided to sell. needs a little finish work. it has been stored
for some time, but seems to be in good condition. i was going to take
it down to look at it, but found out he had cut the rear of the e-shaft
, and because i intend to cut the front i decided i would not learn
enough to make it worth while. the engine weighs about 160# the gear
box about 42#. this is a bargain at $1500 am giving our newsletter
members first chance before i put it in TAP or on barnstormers. take
care, wyo. walt.
wgw75@bresnan.net <mailto:wgw75@bresnan.net>
307-635-4104
Wow! A one rotor p-port slide throttle. Should be good for
about 120 HP.
It sure is a wonderful bargain if it runs.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.