Subject: One rotor p-port slide throttle
From: Rotary Engine
Date: 2/22/2007, 3:13 PM
To: AARotary Engine


    hi all,     i have a 12a single rotor engine home built by an old man
in texas, he is gone west now. he built a 6 pinion planetary gear box
all steel to go on it.  has a 3 blade carbon fiber prop, ground
adjustable, to go with it, no name..  i bought it to get a little more
practical experience with singles.  it is too heavy for my airframes so
i have decided to sell. needs a little finish work. it has been stored
for some time, but seems to be in good condition.  i was going to take
it down to look at it, but found out he had cut the rear of the e-shaft
, and because i intend to cut the front i decided i would not learn
enough to make it worth while.  the engine weighs about 160# the gear
box about 42#. this is a bargain at $1500 am giving our newsletter
members first chance before i put it  in TAP or on barnstormers.   take
care,  wyo. walt.   wgw75@bresnan.net <mailto:wgw75@bresnan.net>
307-635-4104


Wow! A one rotor p-port slide throttle. Should be good for
about 120 HP.

It sure is a wonderful bargain if it runs.

Paul Lamar ...No rotor no motor.


ops on second look not a p-port. 75 to 100 HP
depending on porting if any.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.