Subject: Aluminum center/end plate ? Lighterweight 13b
From: Rotary Engine
Date: 2/23/2007, 9:10 PM
To: AARotary Engine



Fair enough..  None the less, using iron wear surfaces gets around some
surface finish issues, and might make machining a billet part
simpler/easier/cheaper.

However you look at it, it's probably still cheaper to order the
housings from Racing Beat and be done with it.

Matt-

Matt,
That's about the full extent of it - sad as it seems.
George ( down under)

My guess is 50 pounds saved for $4500 is too much money
and not worth it for the vast majority of 2 rotor users.

The one rotor is another matter as the 30 pounds saved
is a more significant part of the total weight. However
a one rotor Mazda is more expensive than a two rotor Mazda.
One would be adding $3000 to the cost of that for
RB aluminum housings.

There is nothing intrinsically
expensive about the way Richard Sohn is doing it.
You mostly have casting cost of about $5 a pound ($150 for
an end housing) and any machine shop can finish them
without the cost of an  NC mill. Also there is far less
technical risk as it uses low tech proven technology.
Paul Lamar

I'm on the fence for this one.  $90 a pound is a lot for many of us -
however, RB and others have done
a lot of R&D.  The trade off is (your) time. Most of us would be hard
pressed to match that price.
Long term reliability of the coating process is anyone's guess,
although, it is likely quite good.
This really comes down to how much the weight is worth to you (and
bragging rights/sales in terms of power/weight)
- when you can buy a good s4 13b core for ~$200.

From a pure weight savings perspective:
It would be nice if the RB housings had an integrated renesis style
water pump - worth a couple #'s.
If David Mathis is still on, many (racers) would pay big time for cermet
rotors weighing 1/3-1/2.  This
would have weight, bearing life and high rpm benefits.
The real savings would be the integration of the rear housing and
redrive (also mount & accessories) ala Everett Hatch et al.
- we are still way behind the early Powersport pioneering efforts.

Another .02
Cary



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.