Ian is in the outback basically and I imagine it can get
REAL hot in the summer. Here are some early pics. Return
fuel systems are notorious for heating the fuel. Also Ian's
fuel rail may be mounted in such a manner as to conduct heat
from the engine. One reason I like the PWM fuel pump scheme.
Ian, try drilling large holes in those fuel rail mounting
brackets to cut down on heat conduction.
Paul Lamar ...No rotor no motor.
Paul, I noticed only one oil return line from the PSRU. There should be
one more from the front?
Or may be I don't see it?
Buly
Yes there are two. Wot you don't see is the nappy to soak up the oil from
the rear seal on the box. Jabaru now make an 8 cylinder firewall forward
package for the RV's.
Ian.
How many are out there and how many hours do they have on them?
The original Jabaru crank shaft had the about same dimensions as
a VW engine crank shaft. Making it twice as long is not a good idea.
Making an 8 cylinder horz opposed crank shaft that will live is
not an easy thing to do. It took Rolls Royce about 10 years to
get the life of the V12 shaft up to 1000 hours TBO. The Lyc
720 cubic inch 8 cylinder horz opposed shaft cost $30,000 just for the shaft
alone. The whole engine is over $100,000
I suspect rear PSRU seal problems are caused by Tracy's input shaft not
being concentric with the e-shaft. That means the needle pilot bearing
in the aft end of the e-shaft has not been properly removed or the
input shaft diameter does not fit the hole perfectly.
One needs to check the run out with a dial indicator.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.