Subject: Fuel injectors and connectors
From: Rotary Engine
Date: 2/24/2007, 6:16 PM
To: AARotary Engine


Does any one know where to buy fuel inj connectors for the rx7 1991 non
turbo? The dealers want to sell the entire harness. Maybe I'll replace
the injectors and if there are alternate makes w/ connectors available
that will do the job then I could go that way.

John Prendergast


Hi John,

The same connector that fits the Ford and MSD and others fit some of
the Mazda injectors.  Here is a photo of the ford injector.  On my
Mazda injectors the tab in the circle wasn't in the center.  I got
the connectors to work by shaving the tab off with a knife.  If those
will work for you, I have them in stock.
http://roblinphoto.com/shop/product_info.php?cPath=4&products_id=30

Bob W.

-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First Flight:  11/23/2006 7:50AM - 3.3 Hours Total Time
Cables for your rotary installation -
http://www.roblinphoto.com/shop/



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.